Here I installed a rear Integra Type R bar. Did this by welding 2 studs on in the trunk. This comes factory on all Integra Type R. Also at the end of the video os a complete walk around of the car. 

In this episode I color sanded the hatch. Then buffed it out. I waited about a month to let the paint fully cure. I did the whole car later on but didn't filmed it. Watch the next video if you want to see the whole car finished. 

In This episode I finally painted the car. It was 3 coats of base then 3 coats of clear. It didn't came out as good, but later fixed it by color sanding the car.

In this episode I shot primer to the car. Sorry if Im just now updating this site, but I have been busy, but continued to work on the car. Check out the youtube page For more detailed work done on the car. 

In this episode decided to delete the abs unit. We did this by using non abs line from either a 94-95 Integra RS or 92-94 Civic. I replaced the 2 front lines and the lines from the master cylinder to the proportioning valve. I used a 94 Integra RS master and Booster and proportioning valve.